Share this product:
This group of electrodes is suited for welding all thicknesses of steel, either wrought or cast, and even high carbon variants, provided the appropriate pre-heat and post-weld heat treatment is applied.
These electrodes all have the following features in common :
(1) A moisture free chemically basic flux coating that is resistant to subsequent moisture reabsorption which ensures very low as opposed to low weld metal hydrogen levels* and thus the absence of weld metal and HAZ hydrogen embrittlement.
(Note : very low hydrogen levels = H2 < 5 ml/100g; low hydrogen levels = H2 < 10 ml/100g)
(2) Weld metal with low levels of oxygen and non-metallic inclusions which imparts great resistance to solidification cracking on exceptionally thick sections under great restraints. The higher the Mn-Si ratio, the greater the resistance to solidification cracking.
(3) For the class of electrode they represent, exceptional sub-zero toughness values are obtained, eg: general purpose types assure toughness values to at least -30 ºC, the higher manganese alloyed types to at least -50 ºC and the nickel alloyed types to -80 ºC.
(4) Both strength and toughness properties of the weld metal are maintained after most weld stress relief heat treatments.
| Type | AWS | Description | Datasheet | MSDS |
|---|---|---|---|---|
| C-10Mo | AWS A5.5 E7010-A1 | Cellulose coated electrode for vertical down welds in high strength large diameter cross-country pipelines. | No Content Available | No Content Available |
| C-10P1 | AWS A5.5 E7010-A1 | Cellulose coated electrode for pipe welding | No Content Available | No Content Available |
| C-10G | AWS A5.5 E7010-G | Manufacturers of a diverse range of advanced welding consumables | No Content Available | No Content Available |
| GA-120 | AWS A5.1 E7014 | Rutile iron powder electrode for all positional fillet welding including vertical down welding | No Content Available | No Content Available |
| RD-360 | AWS A5.1 E7016 | Basic low hydrogen electrode for welding structural steels either on site or workshop fabrication | DOWNLOAD | DOWNLOAD |
| RC-52 | AWS A5.1 E7016 | Basic low hydrogen electrode for welding structural steels either on site or workshop fabrication | No Content Available | No Content Available |
| RD-360U | AWS A5.1 E7016 | Basic low hydrogen electrode for vertical up root runs accessible from one side only | DOWNLOAD | DOWNLOAD |
| RC-52U | AWS A5.1 E7016 | Basic low hydrogen electrode for vertical up root runs accessible from one side only | No Content Available | No Content Available |
| RD-360-1 | AWS A5.1 E7016-1 | Basic low hydrogen electrode for welding structural steels with higher sub-zero toughness properties | No Content Available | No Content Available |
| RD-718 | AWS A5.1 E7018 | Low hydrogen - iron powder electrode with optimum weldability for workshop and site fabricational work | DOWNLOAD | DOWNLOAD |
| RD-718-1 | AWS A5.1 E7018-1 | Low hydrogen - iron powder electrode for welding deoxidised c-mn steels with higher sub-zero toughness properties | No Content Available | No Content Available |
| RD-51 | AWS A5.5 E8018-W2 | Low hydrogen electrode for welding copper containing ferritic weather-proof steels | No Content Available | No Content Available |
| RD-716G | AWS A5.5 E7016-G | Low hydrogen electrode with good toughness at -50 ºc | No Content Available | No Content Available |
| LN-15 | AWS A5.5 E8016-G | Low hydrogen electrode for welding structural steels subjected to a service temperature of -500c | No Content Available | No Content Available |
| RD-16C | AWS A5.5 E8016-C1 | Low hydrogen electrode for welding low alloy ferritic steels used for semi-cryogenic work | No Content Available | No Content Available |
| RD-16C2 | AWS A5.5 E8016-C2 | Low hydrogen electrode for welding low alloy ferritic steels subject to service temperatures down to -80 ºc | No Content Available | No Content Available |
| RD-80 | AWS A5.5 E8016-G | Basic low hydrogen electrode for welding steels with a minimum uts of 550n/mm2 used in a diverse range of applications | No Content Available | No Content Available |
| RD-18C | AWS A5.5 E8018-C1 | Low hydrogen - iron powder electrode for welding low alloy ferritic steels used for semi-cryogenic work | No Content Available | No Content Available |
| RD-18C2 | AWS A5.5 E8018-C2 | Low hydrogen - iron powder electrode for welding 3 to 3.5% nickel steels used for cryogenic work down to -800c | No Content Available | No Content Available |
| RD-18G | AWS A5.5 E8018-G | Low hydrogen - iron powder electrode for welding structural steels subjected to a service temperature of -50 0c | No Content Available | No Content Available |
| RD-718G | AWS A5.5 E7018-G | Low hydrogen - iron powder electrode with good toughness at -50 ºc | No Content Available | No Content Available |
| RD-90 | AWS A5.5 E9016-G | Basic low hydrogen electrode for welding steels with a minimum uts of 600 n/mm² | No Content Available | No Content Available |
| RD-19D1 | AWS A5.5 E9018-D1 | Low hydrogen iron powder electrode for welding steels with a minimum uts of 600 n/mm2 | No Content Available | No Content Available |
| RD-100D2 | AWS A5.5 E10018-D2 | Low hydrogen iron powder electrode for welding steels with a minimum uts Of 700 n/mm2 | No Content Available | No Content Available |
| RD-110 | AWS A5.5 E11016-G | Basic low hydrogen electrode for welding high tensile steels with a minimum uts 750 n/mm2 | No Content Available | No Content Available |
| RD-118G | AWS A5.5 E11018-G | Low hydrogen iron powder electrode for welding steels with a minimum uts of 760 n/mm2 | No Content Available | No Content Available |
NEED HELP?
CONTACT US
